Tensile Strength Tester determines the breaking force of any Fabric, HDPE Bag, Cable, polymer, Rubber Sheet, Rexene, and wire. It produces 99.9% accurate and reliable results as it is made of the finest material.

Tensile Strength Tester consists of a lower stationary base plate, a fixed cross tie on two supporting columns, and a movable crosshead using a lead screw and nut mechanism. A tensile strength tester is used in the final product to check its durability. This is based on the principle that when pressure is exerted on the specimen the clamp of the product is automatically separated. A digital display shows the record of tensile strength and its peak value—bond strength of products like fabric, HDPE bagging, cables, cables, polymers, rubber sheets, sheets, rexene, and wire. The Tensile Strength has been designed so that one testing space is suitable for extra-long test samples.

Before choosing the material grip of the specimen check properly. For example- if the durability of the rigid product then serrated is used because of the nature of the product. Pinned also specified the grip of the product. Plastic products have different criteria to test.

The upper clamp was dually adjusted and the specimen fit between the upper and lower clamp. The clamp is designed in a way that holds the item carefully and pressure is applied based on the nature of the product. To avoid bending of product it is adjusted in between. Alignment is one of the important steps of this process. Grip plays an important role if the specimen is not placed properly then the reading of the result will be wrong and then there will be no means of testing.

The clamp should be removed carefully with constant speed. The best Tensile Strength Tester machine feature is that it tests the product with a speed of 20 inches per minute. When the product proceeds under testing the length of the product changes or elongates this measurement is known as strain. True and engineering two types of strain occur. In engineering strain in pre and post-length of specimen comparison. True strain mediates the length of the product when it undergoes testing.

Technical Specification :

• Capacity of Tester : 500 Kgf. (Accuracy: 50gm)
• S Type Load Cell fixed with Top Grip
• Traverse Speed - Variable 50mm/min to 500mm/min
• Variable Speed Models are also available
• Max. Grip Separation –900 mm
• Min. Grip Separation – 25 mm
• Top Grip is fixed and Bottom Grip is Movable Type.
• Elongation measurement by Steel Scale and Digital Counter Meter.
• Digital Display of Load and Elongation.
• The Peak Value of the Last test can be read on memory.
• User-friendly : user-friendly key panel with the switch of Zero setting and peak value of the last test
• Motor ​: 1/2 HP Single Phase 220 V 50 Hz
• Power 220 V AC 50 Hz.
• Safety Device – By Limit Switch to protect from Over Traverse.

Feature of Tensile Strength Tester-

• Tensile Strength Tester is a versatile machine that helps in the testing of a product through its unique ability. Various materials can be checked easily. Its main feature is that when any industry or laboratory uses it tensile property is easily evaluated through a simple procedure.
• The range of its result is a high volume that helps you to use it at a specific time.
• The clamp grip is designed in a way that the alignment of the product is fully set up in the machine. Indicators are also set up through this result draft carefully.
• The maintenance requirement is very low because every part depends upon the main strain designed in a way that has maximum use but with a low cost of maintenance.
• All data that happened in operation is easily displayed on a digital screen because if any mishap happens with the product then its data can easily be checked through previous records. The report can be printed and a presentation can be made for future reference.
• Heavy metal is used in the machine which shows how it can be fully applied over metal, alloys, and plastic. Aerospace parts can also be checked.
• The Parameters of the test are easily set up through which key points and entry points also show on the digital screen. Experts operate that machine because strength is a big task that will decide the elasticity of the product.
• A switch called a limit switch is set up in a machine through which a limit set up of strain is set up in the machine for safety purposes.
• Efficiency of time is also the best feature of the product because if your team operates 100 tests monthly then it can reduce the time that’s why you can conserve 30 % of the time during tests performed.