Peel Strength Tester is used to test the strength of bonded material. It measures tear, adhesive friction property, packaging material, coating product, fabric, other laminated material, and components of products. If you test the quality of the adhesive product then the Peel Bond Strength Tester helps to measure the strength when two substances help in testing the bond between two items. When the sample is tested under a machine the pressure exerted on the substance and its durability check how much pressure we can apply to the sample.

In the packaging industry adhesive is an essential thing for transportation so Adhesion Strength Tester is used for joining different parts together. As a Peel Bond Strength Tester manufacturer, we provide better solutions to our customers with great quality machines. Every tool used in the machine is fully tested. Digitally display also runs a long time with accurate result manual machine available in our stock.

Working

The Peel ability of the adhesive can be checked through a machine and quality control is also checked properly with the help of test conduct but a procedure is followed during the test let’s see this procedure.

• The first step is to prepare the specimen and start the machine
• Specimen placed in between grip two grips present one present in lower part another is present in upper surface these grips tighten.
• Then lower limit teats proceed further and pressure is applied on the sample The graph represented on the screen then it tested result report can be collected.

So manufacturer can easily conduct this test and it proceeds under three test procedures like180 degree peel strength test, 90 degree peel, and T-peel test. For better results, an accurate method is chosen according to the specimen. Pressure-sensitive products checked through the machine like foils, paper, film tapes, and labels.

Technical Specification :

• Maximum Load range: 5 Kgf to 20 Kgf
• Grip to Grip Span: 300 mm
• Test Speed Range: 300 mm per min ± 5%
• Load Monitoring: Peak Load indicator with digital readout and peak hold feature
• Load Sensor: Universal Z-type Load Cell.
• Clamping mechanism: Vice type clamping Grips standard width-15 mm
• Load accuracy: ±0.5% full scale (with master load).
• Least count: 0.001 to 0.002
• Load Cell Over-load safety: <80% of the total load
• Safety Feature: Up and down fixed and movable mechanical limit switch.
• Over Load relay contact rating: Potential free relay 5 Amp. 220 V AC single phase
• Earthing Required: Proper Earthing required corresponding to not more than 4 V AC concerning neutral

Features of Peel Bond Strength Tester

• One of the best features that a Seal Strength Tester uses to test the seal quality is to watch how much pressure is applied on the seal of any product and then a sample test after that other manufacturing of the product proceeds according to the seal tester.
• At the angle of 180 degrees plastic shield peels easily with judgment of pressure applied on both sides. Strength can easily be evaluated.
• A bond Strength Tester is a tester in which the bond between the sample tested through an instrument and the strength of the bond depends on pressure which is applied through the machine. As a manufacturer, we provide a better version of the machine that checks the bond of the item.

Digital Model Features

• The accuracy tested under the machine is +/-2%. This shows when the accuracy point is high so the machine is counted under a good rating.
• Computerized and digital models are also available where the display shows in dual mode. It can easily attached to a computer system then a digital indicator shows a graphical representation when pressure is applied to the product.
• Graph shows the force and time representation and 10 sample recording reports can be displayed in a single report and the report can be saved on desktop.
• Company address and logo also displayed on report data can be recorded in excel sheet and the chart also shows for accuracy f result about the product.