This oven is a versatile oven that is used in various laboratories which are related to the pharmaceutical, food industry, electronics, and chemical industries.Laboratory ovens are helpful in different processes like curing, drying different physical and chemical compositions, annealing, and most commonly process baking. This is found in laboratories of research, electronic, and forensic labs.

When any case comes in, one of the oven vacuums helps configure fingerprints. It is a thermal convection oven useful for further use in laboratories as sterilization. When any chemical composition occurs, then it can proceed with the oven and pthe hysical composition can easily be handled through this oven. The size of the oven is 28 liters to 906 liters, and the temperature can also be the main cause of every reaction in the oven, so it can reach up to 300 degrees Celsius.

Principle of Working

In laboratories, items should be heard first, this is done in the chamber of the oven. As heat is distributed because of the pre-heat of the oven. preheating is the first step to start any process. Curing is one of the processes in which the physical and chemical properties of substances start to change. It is used mainly in paints, plastic, rubber, and nanotechnology. When this happens with the material, then the properties changes are also checked properly, which helps to change with small changes in the material.

After curing, drying is the next step in which the moisture of the substance is removed through heating. Biological components have a larger amount of water content, that is why when they go under the oven, they are hard to handle because biological components have lower tolerance power, so laboratory ovens are best for these substances. One of the heats, which is very important in this oven, is annealing heat. This heat is used for a product that changes the properties of the material without melting it, and the flexibility of the product increases stress relief, and it cools slowly. In the laboratory, sterilization is also one of the best uses for this oven

Advantages of Laboratory Ovens

• Wet material is difficult to put in the oven for sterilization, but the laboratory is used for this process. Oil and powder can spoil in the chamber, but through this oven.
• Equipment that is made from metal easily operates in an oven. When sterilizing wet products, they can spill and corrode over equipment. to avoid this, any other metal is used to reduce corrosion.
• The fan present in the oven through this heat is distributed all over the chamber, which shows an even distribution of heat.
• The article should not be put directly on the floor. A holder can help a lot to avoid any damage. A holder is necessary equipment because of the high temperature outside of the chamber so this oven is a better option nowadays.
• Load strength is an important factor in helping to check the quality of the load higher than prescribed limits. When weight is low, then not a big thing, but if weight is higher, than it has a chance of breaking the machine Chamber
• Cleaning the chamber easily due to the presence of a metallic base makes it easy to clean the chamber.

The oven is plugged in and the switch-on button then preheats the oven, after it needs heat distributed all over the chamber. Temperature can set a limit that any product needs. Shelves are present in the oven.

Laboratory Oven Manufacturer and Supplier

Texcare is a leading manufacturer of laboratory ovens in India, offering top-quality equipment at the best prices. We produce a wide range of laboratory ovens to meet various needs. Laboratory oven manufacturers in India are very much in trend. That demand now in the market is very high. As a laboratory oven manufacturer, we are in the first division of good-quality manufacturing. Laboratory Oven Price is affordable and fits into a pocket.

Technical Specification :

• Inside Dimension : 455 x 455 x 710 mm
• Display: HMI Based Touch Screen
• Accuracy Temperature : ± 2ºC / Humidity ± 5%
• Least Count/Resolution Temp / Humidity: 0.1ºC / 1 %
• Power : 15A, 220V , Single phase, 50 Hz
• Temperature Range : 15ºC to 60ºC
• Humidity Range: up to 95%RH
• Timer: 9999 Hrs.
• No. of Sample racks: 2
• Wet Heater: 1 kW, 1 no.
• Dry Heater: 500 Watt, 1 no.
• Temperature Sensor: 1 (PT-100)
• Humidity Sensor: 1 (RH)
• Movement: Castor Wheels
• Material: Exterior and Interior Stainless Steel Finish Stain Steel matt finish for corrosion resistance
• Water Level Low: Alarm output

• Insulation is superior, that is why it helps to maintain stability in the chamber and improve consumption of power, reducing the cost of operating. It shows when electricity flow is one of the important factors, but it is high cost if used for industrial purposes, but laboratory ovens help reduce operating costs.
• Due to the PID microprocessor, it is a simple process of the oven, and it also fastens the process, if the time taken in a simple oven is 20 minutes, then through the laboratory oven it is reduced up to 10 minutes.
• The glass door is rigid which assures sample security; it will not spill out from the chamber and also reach the final result.
• One of the main features is that preheat chambers help to show the best thermal activity, which is why the whole chamber fully gets heated before starting the process.
• External surfaces can easily be cleaned because the surface is coated with Isocide after application, 99.9% of bacteria can be easily cleaned when exposed for up to 24 hours. Cleaning is a very important step in the oven because every substance has its property, and it is cleaned up properly so that it is always a new chamber for the next substance testing.